涂善东科研成就科研综述涂善东创新发展了高温承压设备安全维修、安全评价以及本质安全调控等技术，成功应用于石化、能源等重化工业领域安全保障工程，为中国万台承压设备事故率逐年下降做出了贡献；推广应用于大型反应器、换热器、汽轮机、高端阀门等产品的可靠性设计制造，为企业创造了显著经济效益 

学术论著据2022年7月中国工程院网站显示，涂善东发表论文354篇 

主要学术论文（部分）Liu Yang, Zhoujie Wang, William Dempster, Xinhai Yu, Shan-Tung Tu. Experiments and transient simulation on spring-loaded pressure relief valve under high temperature and high pressure steam conditions, Journal of Loss Prevention in the Process Industries, 2017, 45: 133-146

Guo-Jian Deng, Shan-Tung Tu, Xian-Cheng Zhang, Ji Wang, Cheng-Cheng Zhang, Xia-Yi Qian, Yi-Ning Wang. Small fatigue crack initiation and growth mechanisms of nickel-based superalloy GH4169 at 650 degrees C in air. Engineering Fracture Mechanics 2016; 153: 35-49.Hong-Shu Ma, Guo-Zhen Wang, Shi Liu, Shan-Tung Tu, Fu-Zhen Xuan. In-plane and out-of-plane unified constraint-dependent creep crack growth rate of 316H steel. Engineering Fracture Mechanics 2016; 155: 88-101.Jian-Feng Wen, Shan-Tung Tu. A multiaxial creep-damage model for creep crack growth considering cavity growth and microcrack interaction. Engineering Fracture Mechanics, 2014; 123: 197-210.Ming-Liang Zhu, Fu-Zhen Xuan, Shan-Tung Tu. Observation and modeling ofphysically short fatigue crack closure in terms of in-situ SEM fatigue test. Materials Science and Engineering: A, 2014; 618: 86-95.Yu-Cai Zhang, Wen-Chun Jiang, Shan-Tung Tu, Jian-Feng Wen. Simulation ofcreep and damage in the bonded compliant seal of planar solid oxide fuel cell．International Journal of Hydrogen Energy, 2014; 39: 17941-17951.Xian-Cheng Zhang, Shan-Tung Tu, Fu-Zhen Xuan. Creep–fatigue enduranceof 304 stainless steels. Theoretical and Applied Fracture Mechanics, 2014; 71: 51-66.Yu-Cai Zhang, Wen-Chun Jiang, Shan-Tung Tu, Jian-Feng Wen．Using shorttime creep relaxation effect to decrease the residual stress in the bonded compliant seal of planar solid oxide fuel cell – A finite element simulation．Journal of Power Sources, 2014; 255: 108-115.Jian-Ping Tan, Guo-Zhen Wang,Shan-Tung Tu, Fu-Zhen Xuan. Load-independent creep constraint parameter and its application. Engineering Fracture Mechanics, 2014; 116: 41-57.Jie Yang, Guo-Zhen Wang, Fu-Zhen Xuan, Shan-Tung Tu. Unified correlationof in‐plane and out‐of‐plane constraints with fracture toughness. Fatigue & Fracture of Engineering Materials & Structures, 2014; 37(2): 132-145.Yun Tu, Shan-Tung Tu. Fabrication and characterization of a metal-packaged regenerated fiber Bragg grating strain sensor for structural integrity monitoring of high-temperature components. Smart Materials and Structures, 2014; 23(3):035001-1-11.Fa-Kun Zhuang, Guo-Yan Zhou, Shan-Tung Tu. Numerical investigation of frictional effect onmeasuring accuracy of different small specimen creep tests. International Journal of Pressure Vessels and Piping, 2013;110:42-49.Jian-Feng Wen, Shan-Tung Tu, Xin-Lin Gao, JN Reddy. Simulations of creepcrack growth in 316 stainless steel using a novel creep-damage model. Engineering Fracture Mechanics, 2013; 98: 169-184.Yun Tu, Yu-Hua Qi, Shan-Tung Tu. Fabrication and thermal characteristics ofmultilayer metal-coated regenerated grating sensors for high-temperature sensing. Smart Materials and Structures, 2013; 22-28.Jian-Ping Tan, Shan-Tung Tu, Guo-Zhen Wang, Fu-Zhen Xuan. Effect and mechanism of out-of-plane constraint on creep crack growth behavior of a Cr-Mo-V steel. Engineering Fracture Mechanics, 2013;99:324-34.Shan-Tung Tu, Xin-Hai Yu, Wei-Ling Luan, Hoger Loewe. Development of micro chemical, biological and thermal systems in China. Chemical Engineering Journal, 2010; 163(3): 165-179.张佳敏,王宁,郝世奇,刘柏,朱金龙,张显程,涂善东. 国产690镍基合金非对称加载低周疲劳性能研究[C]//.压力容器先进技术——第十届全国压力容器学术会议论文集（下）.,2021:467-474.DOI:10.26914/c.cnkihy.2021.033984.李凯尚,王润梓,张显程,涂善东. 基于多尺度建模方法的蠕变—疲劳寿命预测[C]//.压力容器先进技术——第十届全国压力容器学术会议论文集（上）.,2021:162-172.DOI:10.26914/c.cnkihy.2021.034157.张玉财,涂善东,罗云,蒋文春,张显程.钎焊接头的蠕变损伤与寿命预测[J].机械工程学报,2021,57(16):218-234+247.赵亮,涂善东,刘刚,刘福广,李勇,杨二娟.蒸汽发生器手孔镍基合金堆焊层开裂分析[J].压力容器,2020,37(12):42-47.涂善东,于新海,张健.严苛条件下承压系统安全阀技术[J].化工进展,2019,38(01):145-154.DOI:10.16085/j.issn.1000-6613.2018-1209.涂善东,轩福贞,王国珍.高温条件下材料与结构力学行为的研究进展[J].固体力学学报,2010,31(06):679-695.DOI:10.19636/j.cnki.cjsm42-1250/o3.2010.06.009.涂善东,轩福贞,王卫泽.高温蠕变与断裂评价的若干关键问题[J].金属学报,2009,45(07):781-787.朱冬生,孙纪远,宋印玺,郑伟业,王正东,涂善东.喷雾冷却技术综述及纳米流体喷雾应用前景[J].化工进展,2009,28(03):368-373.蒋文春,巩建鸣,唐建群,陈虎,涂善东.焊接残余应力对氢扩散影响的有限元模拟[J].金属学报,2006(11):1221-1226.章小浒,王正东,涂善东.原油储罐用钢的开发与应用最新进展[J].压力容器,2006(03):38-43.杨洪伟,栾伟玲,涂善东.等离子喷涂技术的新进展[J].表面技术,2005(06):7-10.DOI:10.16490/j.cnki.issn.1001-3660.2005.06.003.栾伟玲,涂善东.喷丸表面改性技术的研究进展[J].中国机械工程,2005(15):1405-1409.倪红芳,凌祥,涂善东.多道焊三维残余应力场有限元模拟[J].机械强度,2004(02):218-222.DOI:10.16579/j.issn.1001.9669.2004.02.020.陶国良,涂善东.石墨/碳纤维/聚丙烯高强导热材料的研究[J].中国塑料,2004(11):34-37.DOI:10.19491/j.issn.1001-9278.2004.11.006.倪红芳,凌祥,涂善东.多道焊三维残余应力场有限元模拟[J].机械强度,2004(02):218-222.DOI:10.16579/j.issn.1001.9669.2004.02.020.栾伟玲,涂善东.温差电技术的研究进展[J].科学通报,2004(11):1011-1019.凌祥,周帼彦,邹群彩,涂善东.板翅式换热器新技术及应用[J].石油化工设备,2002(02):1-4.凌祥,涂善东,陆卫权.板翅式换热器的研究与应用进展[J].石油机械,2000(05):54-58.DOI:10.16082/j.cnki.issn.1001-4578.2000.05.021. 代表性著作涂善东. 高温结构完整性原理, 北京: 科学出版社, 2003.涂善东等. 材料服役中表面的失效行为及防治. 见: 中国材料工程大典第16卷. 北京: 化学工业出版社, 2005.涂善东等. 机械结构强度与失效，见：机械科学与制造－国家自然科学基金委员会十一五战略研究报告. 北京：科学出版社，2006.涂善东. 过程装备与控制工程概论. 北京: 化学工业出版社, 2009.涂善东等. 零件与结构的失效与安全服役. 见：机械工程学科发展战略报告（2011-2020）. 北京：科学出版社, 2010.王磊, 涂善东. 材料强韧学基础, 上海: 上海交通出版社, 2012.Tu ST, Zhou GY. Compact Heat Exchangers in Clean Energy Systems. In Handbook of Clean Energy Systems, Wiley, 2014.Fatemi A, PookLP, Spagnoli A, Tu ST (Guest Editor). Special Issue on 'Multiaxial Fracture 2013’, Engineering Fracture Mechanics 2014; (Volume 123), Oxford: Elsevier.Yan J, Chou SK, Tu ST, Jin HG, Desideri U (Guest Editor). Special Issue on Energy Innovations for a Sustainable World, Applied Energy 2013; (Volume 112), Oxford: Elsevier.Tu ST, Wang GZ, Gong JM (Guest Editor). Special Issue on Latest Development of Applied Materials Technology, Advanced Materials Research (Volume 509). Switzerland: Trans Tech Publications, 2012.Tu ST, Takahashi Y (Guest Editor). Special Issue on High Temperature Strength, Acta Metallurgica Sinica. Oxford: Elsevier. 2011.Takahashi Y, Tu ST (Guest Editor). Special Issue on High Temperature Strength, International Journal of Pressure Vessels and Piping. Oxford: Elsevier. 2009.Tu ST, Chen XD (Guest Editors). Higher Pressure, More Power and Greater Responsibility,Special Issue of International Journal of Pressure Vessels and Piping, Vols. 139-140, 2016.Oxford: ElsevierTu ST, Chen XD (Editors), Pressure Vessel Technology: Preparing for the Future, Procedia Engineering, Volume 130, Pages 1-1794. Oxford: Elsevier, 2015 科研项目据2022年7月中国知网显示，涂善东主持或参与基金支持的国家级科研项目196项，省部级科研项目129项 

国家重点研发计划项目：极端条件下重大承压设备基于寿命的安全维护关键技术与工程示范、严苛环境下典型承压类特种设备结构安全性评价及失效预防技术等  科研获奖据2022年7月中国工程院网站显示，涂善东获国家科技进步奖一等奖1项（第二完成人）、国家科技进步奖二等奖3项（2项为第一完成人）、国家技术发明奖二等奖1项（第二完成人），省部级特等奖、一等奖10项；国家发明专利69项、国际专利4项、软件著作权14件  

部分科研获奖时间项目名称奖励种类2014极端条件下重要压力容器的设计、制造与维护国家科技进步奖一等奖陈学东、涂善东、郑津洋、范志超、轩福贞、寿比南、陈永东、谷文、王冰、陈志平、韩冰、杨国义、崔军、章小浒、李秀杰2013高温过程装备结构完整性关键技术及应用国家科技进步奖二等奖涂善东、轩福贞、陈学东、阳 虹、沈红卫、范志超、梅林波、贾九红、胡明东、周帼彦2004化工设备预测性维修规划关键技术的研究国家科技进步奖二等奖涂善东、巩建鸣、凌 祥、张礼敬、周昌玉、王正东、耿鲁阳、陈嘉南、柳雪华、喻红梅1999化工设备事故预测技术国家科技进步奖二等奖2012高效节能的新型紧凑式换热器及工业化应用国家技术发明奖二等奖凌祥、涂善东、缪志先、彭浩、李洋、朱跃钊2020甲醇重整制氢及其燃料电池系统关键技术中国石油和化学工业联合会技术发明奖一等奖于新海（2）、涂善东（5）等2012多组元结构的损伤、断裂与安全评定理论上海市自然科学奖一等奖栾伟玲、周帼彦、涂善东、周兴贵参考资料：      

以上内容由大学时代综合整理自互联网，实际情况请以官方资料为准。